Tuttnauer 1730EK, Техническое руководство

Страница: 15 / 111

www.shanghaidelan.com
13
Remarks:
— When cursor is set under any figure, pressing the START/STOP
key stops calibration.
— When the cursor is set under any figure, it enables to feed this value
to the reading of temperature by pressing the PARAMETERS key.
Example:
If the cursor is set under R68.0 on the upper row and the actual
temperature of the autoclave is now 66.0
º
C, by pressing the
PARAMETERS key, the temperature reading will be corrected from
R68.0 to R 66.0.
This calibration method enables the technician to change a certain point
without affecting a second point.
Example:
When the working temperatures are 134ºC and 121ºC but the actual
temperature are 132ºC and 121ºC
The measured temperature for 134
º
C must be corrected without
changing the temperature at 121
º
C,
Considering the above example, the setting of data can be done as
follows:
A 121.0 R 121.0
A 132.0 R 134.0
The system will calibrate the new offset and gain and retain them into the
non-erasable memory.
As a result, while running a 134
º
C program the correction is
automatically made, while at 121
º
C no change is felt.