7
03
Installation
Manual 4804 Rev C p/n 004804 0000
SEALANT RECOVERY SYSTEMS
Figure 3-1 on page 7
through
Figure 3-4 on
page 10
illustrate sealant con
¿
gurations:
• Once-Through
(
Figure 3-1
)
• Partial Recovery (
Figure 3-2
)
• Full Recovery with Circulating Pump
(
Figure 3-3
)
• Full Recovery without Circulating (
Figure 3-4
)
CAUTION
!
Do not run the pump dry.
ONCE-THROUGH RECOVERY
The once-through recovery system takes water
directly from the water supply through the
pump and discharges it directly through a gas/
liquid separator tank to an approved drain. This
arrangement is most common on small pumps,
in installations where water conservation is not a
factor, or where contamination of sealant is not a
factor. Optional valving arrangement is designed
to conserve sealant
À
ow and power, and when the
pump is operating at high pressure (low vacuum).
The optional system components are described
on
page 12
.
Figure 3-1 – Piping Schematic Once-Through Recovery System
Содержание KLRC Series
