USING IT FOR THE FIRST TIME
-Read this handbook to familiarize yourself with all the parts of your new food
processor.
-Clean all the parts and accessories before using the appliance for the first time (see
paragraph “Cleaning”).
Take note:
1. Blades should always be handled with care as they are very sharp.
2. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
3. Children should be supervised to ensure that they don’t play with the appliance.
4. If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
5. Switch off the appliance before changing or adjusting accessories or parts.
USAGE GUIDE
Your new food processor will help you to prepare a lot of basic mixtures that you
can use for your recipes.
Please abide by the following instructions to achieve the best results and to keep
your appliance in good working condition.
Warning:
Never exceed the maximum quantity level and never pour liquids hotter
than 75
℃
into the bowl and/or blender.
Follow these instructions:
-Never leave the appliance unattended while it is on.
-Never make the appliance work while it is empty.
-Never touch moving parts.
-Never put your fingers inside the lid opening.
-Never use your bare hands to press down ingredients into the lid opening.
-Do not use the appliance for hard ingredients (e.g. frozen meat, ice), rubbery (e.g.
candied peel), or inedible stuff (e.g. bones).
-Do not remove the lid and never replace accessories without switching off the
appliance.
II
. Chopping Function
-
Put the plastic bowl on power unit and turn the handle clockwise (Diagrams 1
& 2).
- Put the blade support on the axis in the middle of the bowl and press it to the
bottom. Then fix the chopping blade to the blade support (Diagrams 3 & 4).
Warning:
The blade is sharp so hold the plastic part while using.
- Put the food in the bowl (Diagram 5). Big chunks of food should be cut into
smaller pieces (approx 2 cm
×
2 cm
×
2 cm).
- Put the cover on the bowl and turn until it locks to place (Diagram 6 &7).
- Fix the plug to the electric socket then press the LCD power switch button. The
background light goes on.
- There are 8 different speeds in all so you can choose a suitable speed according to
need by pressing the button “
+
” or “
-
”.
- After selecting, press the LCD control button (“ON/OFF”). The appliance should
begin to operate (Diagram 8).
-
In the process, you can adjust the speed by pressing “
+
” or “
-
” buttons. You can
also accelerate the speed by pushing the PULSE button. In addition, you can
suspend the motion of the appliance by pressing the “ON/OFF” button.
- When chopping is finished, cut off the power by pressing the LCD power switch
button. After the blade stops, pour out the food.
II
.
Whisking Function
Mixing function basically has the same operating steps as the chopping function.
Just change the chopping blade to the shredding blade. It is used for mixing and
whisking of food, e.g. eggs.
