Tusa ZEN AIR IQ-950, Руководство пользователя

Страница: 38 / 137

39
At any time while operating in Surface Modes, the ZEN AIR will
enter Dive Mode upon descent to 5 FT (1.5 M).
• During the 2 hour pre dive surface period, if the M button
is pressed to access other screens in the Watch Mode
sequence, Surface Mode must again be accessed prior to
the first dive of a series (if Wet Activation is set OFF).
• When Wet Activation is set ON, the Wet Contacts will
activate the selected Dive Mode regardless of what Mode
the ZEN AIR is operating in at the time of the descent.
The ZEN AIR will enter Post Dive Surface Mode following a dive
upon ascent to 2 FT (0.6 M). The Surface Interval Time colon
will flash during the first 10 minutes after a NORM or GAUG
dive (Fig. 30A), or 1 minute after a FREE dive (Fig. 30B).
During the first 10 minutes after a dive, the Surface Main screen
for the operating mode remains on display. Watch Default Time
can be viewed for 5 seconds during that period by pressing and
releasing the M button momentarily (< 2 sec).
When the 10 minute Surface Time has elapsed, the Watch De-
fault Time screen will replace the DC Surface Main screen which
can then be accessed by pressing the M button for 2 seconds.
Fig. 30B - SURFACE MAIN
(< 1 min after FREE dive)
Fig. 30A - SURFACE MAIN
(< 10 min after NORM or
GAUG dives)