Tusa ZEN AIR IQ-950 Скачать руководство пользователя страница 29

Страница: 29 / 137

SET DAILY ALARM

, information provided includes (Fig. 22):

> Graphics AL and SEt with clock (alarm) icon.

> Alarm Time previously set (hr:min) with the Hour Set Point

flashing.

• S (hold) while the Hour digits are flashing will scroll upward

through the Set Points in 1 Hour increments at a rate of 8

per second.

• S (< 2 sec) will step upward through the Set Points one at

a time.

• A (< 2 sec) will save the Hour Set Point and the Minute

digits will flash.

• S (hold) while the Minute digits are flashing will scroll

upward through the Set Points in 1 Minute increments at a

rate of 8 per second.

• S (< 2 sec) will step upward through the Set Points one at

a time.

• A (< 2 sec) will save the Set Point and revert to the Daily

Alarm Status screen indicated by the graphic ON (or OFF)

flashing.

• M (2 sec) will revert to the Watch Default Time screen.

Fig. 22 - SET DAILY ALARM

Содержание ZEN AIR IQ-950










































































































































Результаты поиска

Содержание ZEN AIR IQ-950

Отзывы:

Похожие инструкции для ZEN AIR IQ-950

Бренды по названию

Популярные бренды

Tusa ZEN AIR IQ-950, Руководство пользователя

Результаты поиска

Содержание ZEN AIR IQ-950

Отзывы:

Похожие инструкции для ZEN AIR IQ-950

Бренды по названию

Популярные бренды