manualshive.com logo in svg

Turtle Tough CPVC, Руководство по установке

Поделиться
Скачать
Turtle Tough CPVC Скачать руководство пользователя страница 4

TURTLE

TOUGH

®

 

4

Qualification and training of personnel

The personnel employed for installation, operation, inspection, and maintenance, must be suitably qualified for 
this work. The areas of responsibility, competence and supervision of the personnel must be precisely defined by 
the owner. Personnel who do not have the required know-how must be trained and instructed. Also, the owner 
of the system must ensure that the relevant personnel are fully familiar with and have understood the contents of 
this manual.  Should training be required please contact your Turtle Tough distributor
.

Important safety instructions

When installing and using this electrical equipment, basic safety precautions should always be observed, including 
the following:

NOTICE

Read and follow all instructions. Save these instructions.

WARNING

To reduce the risk of injury, do not permit children to use this product.

WARNING

Risk of Electric Shock. Connect only to a suitable isolated, hard-wired electrical outlet. It is 
recommended that the outlet is protected by an RCD (Residual Current Detector) or is in 
any event in compliance with all local electrical regulations. Do not bury the electrical supply 
cable.

WARNING

To reduce the risk of electric shock, replace damaged electrical cable immediately.

WARNING

To reduce the risk of electric shock, do not use an extension cable to connect the unit to an 
electric supply; provide a properly located outlet

Hazards due to non-compliance

Failure to comply with the safety instructions may endanger not only people but also the environment and the system.
The following hazards, in particular, may arise:

• 

Failure of major system functions.

• 

Failure of specified methods for maintenance and repair.

• 

Danger to people due to electrical, mechanical and chemical effects.

Safe Operation

The safety instructions contained in this manual must be observed. 

 

The owner is responsible for ensuring compliance with local safety regulations.

Danger

Warning

Electric Shock 

 

Hazard

Electric Shock 

 

Hazard

Danger

Electric Shock 

Hazard

Содержание CPVC

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды