Turtle Beach Montego II, Руководство пользователя

Страница: 15 / 76

15
I
NSTALLING THE
CD-ROM A
UDIO
C
ABLE
The Montego II Home Studio comes with an audio connector cable — one
end is keyed (MPC-2), the other is not (Sony). All CD-ROM drives that
adhere to the MPC-2 (Multimedia PC) standard have an MPC-2 jack.
Connect the MPC-2 connector to your CD-ROM drive. Then attach the
Sony connector to the Montego II sound card.
When connecting the CD-ROM audio cable, note that:
The audio cable should be plugged into the CD-ROM drive first; then
the other end of the interface should be plugged into the appropriate
connector on the Montego II Home Studio sound card. Make sure
that you are plugging the audio connector into the 4-pin header
labeled “CD IN.”
On the cable, “white” is “left” and “red” is “right.”
When connecting the cable to the Montego II Home Studio, the red
wire should be on the right (white should be closest to the slot cover.)
N
OW
Y
OU
A
RE
R
EADY TO
I
NSTALL THE
D
RIVERS
Proceed to the chapter that applies to your system for instructions on
installing the drivers:
Windows 95
&
98 Installation
Windows NT 4.0 Installation
Sony Connector
Left
Ground
Ground
Right
MPC-2 Connector
(keyed)
Left
Ground
Ground
Right