WWW.TURNSTYLEGATES.COM
Foreign & Domestic Patents Issued & Pending
!
1-800-548-2212
9
Step 1:
Mount lower pillar mount bracket onto opposite pillar/post.
a.
Determine location of lower bracket onto adjacent pillar/post
.
Using a string level, stretch a string from the bottom edge of the previously installed
lower bracket to the opposite pillar/post.
Once the string is level, mark the opposite pillar/post.
Place the bottom edge of the second lower pillar mount bracket onto the opposite
mark on the pillar/post.
Once the correct location of the opposite lower pillar mount bracket is determined,
return to page 7 and follow installation instructions from
Step 1:
b.
Level lower
pillar mount bracket.
At this point you have successfully installed a Pillar Mount dual gate
manual Turnstyle GMS™
If you are installing an automatic Turnstyle GMS™, proceed to page 14 to find
the electronics installations instructions.
Leave the adjustment collar on the lower
bracket loose for manual operation.
Step By Step:
How to Install the opposite operator for a
Turnstyle Pillar Mount Dual Gate Mounting System (GMS)™
When mounting dual gates onto pre-existing columns
or posts which are not perfectly plumb, adjustable
brackets may be used. See page 13.
