·
Programming the parameters of the ESC:
-
Select
‘Programming Set’
. (also the Shortcuts button
)
- Click
‘Connect’
button or
‘Reading Data from ESC’
button to read out the current parameters of
controller, and the firmware version is also displayed below.
- Select the parameters you wish to set.
- Click the
‘Update’
button to save the modification.
- Clicking the
‘Back to default’
button will modify the parameters of ESC to factory default.
·
Updating the firmware of the ESC
-
Click the
‘update’
menu
(the Shortcuts button
)
-
Click the
‘Get ESC’s Ver’
button, which will display current version number.
-
Click the
‘
Open’
button to achieve the upgradeable software*, which can be downloaded from Internet.
-
Click the
‘
Start’
button to upgrade the firmware of ESC to new version.
Firmware upgrade will be finished in 3-5 seconds.
NOTE
:
Please according to the instructing steps to set the parameters always after current parameters of
ESC is displayed in window, otherwise programming of ESC will be defeated and ESC will still keep the
parameters set in last time.
TURNIGY ESC-40A MANUALS
7 page / 14 pages
