![Turnigy Super Brain ESC-40A Скачать руководство пользователя страница 3](http://html1.mh-extra.com/html/turnigy/super-brain-esc-40a/super-brain-esc-40a_instructions-manual_1182121003.webp)
Ⅵ
Using the ESC
·
Calibrate the throttle range of transmitter at the first time to use the controller
(Recommend)
- Correctly connect the ESC with brushless motor, plug the receiver lead of ESC into receiver ( usually into
Channel 3);
- Put the throttle to the highest position, turn on the transmitter;
- Power on the receiver, ESC and motor. There are 3 beeps emitted from the motor, which indicates all
electronics are correctly power on for the setting.
- Then there are 4 long beeps emitted from the motor
♪
♪
♪
♪
.
- Waiting one second, there will be two beeps emitted from the motor
- Calibration of throttle is completed.
Recommend:
Please always clearly know current parameters of ESC before use, and program it according to
your configuration. Please take the following form as reference to program the ESC ( Default setting is displayed
in blue. Throttle range in gray cannot be programmed but be auto changed after calibrating the throttle travel of
transmitter.) Seeing the appendix about the detail programmable features of Turnigy Super Brain ESC-40A.
♪
♪
NOTE: 1).
If you have succeeded in calibrating the throttle range of transmitter, the throttle range will be
displayed in
‘Programming Set’ window
when you connect the controller to PC. The factory preset throttle
range is 640 uS.
LVC
Auto
5.0V
6.0V
(2 Lipo)
7.2V
8.4V
9.0V
(3 Lipo)
12.0V
(4 Lipo)
Current Limiting
Sensitivity
Standard
Insensitivity
Disabled
Brake Type
No brake
Soft brake
Hard brake
Timing Advance
Auto
Low
Middle
High
Cutoff Type
Hard cutoff
Soft cutoff
Start Type
Soft start
Standard
Fast start
Governor Mode
Auto
Governor Low
Governor High
PWM Rate
8KHz
12KHz
16KHz
Throttle Range
640 uS
NOTE:
You also can program the ESC-40A through Turnigy Program Card. Please read the manuals of
‘Turnigy Program Card’ for more detail instructions.
TURNIGY ESC-40A MANUALS
3 page / 14 pages
·
Program the ESC’ s settings or use the default setting (by Turnigy Program Card/ on PC/ by throttle stick)
- Move the throttle to the lowest position after each one beep of the four long beeps.