·
After you click the
‘finish’
button
,
there will be an icon
‘Turnigy Super Brain ESC’
on computer desktop.
·
Installation complete.
Ⅷ
How to connect the controller to PC
·
Plug the
receiver lead
of ESC-40A into the Turnigy USB Linker, please pay attention to the polarity for correct
connection. (Seeing the label on the USB Linker)
·
Connect the USB Linker to one of available USB ports of computer. A little red LED on USB Linker will light up.
NOTE:
These two destination folders are both default
and cannot be changed, otherwise the software cannot
work normally.
ESC
USB Linker
USB port of PC
TURNIGY ESC-40A MANUALS
5 page / 14 pages
NOTE:
The receiver lead of Turnigy controllers are consisted of three small colored wires and adopt JR
wire configuration, i.e, red (+), brown (-) and orange (signal)
