This program is for charging Pb(lead-acid) batteries with nominal voltages from 2 to 36V. Lead-acid, VRI..A or Gel
batteries arc cotally different from NiCd or NiMH. They can only deliver relativdy lower current compared 10 their
capacity and charging can only be done at relatively low rates compared 10 other chcmistrks. The optimal charge current
0.1.C . Pb batteries must not be charged rapidly. Always follow the instructions supplied by the battery manufactun::r.
Charging a Pb battery
Pb CHARGE
I.OA 12.ov (6P)
Charge Pb battery. Th<! left side of the first line shows the type ofbattcry(Pb). The
second line shows the charge current and number of cells you selected. After Sl.'tting
the current and voltage press
Start/Enter
for more than 3 seconds to start the
charging.
Charge current: U.05 -JOA
Banery..::ells: 1-!2P(l-24V)
Status
display.
You
can stop the charging process
at
any
ttme by
pressing
Batt
type/Stop.
Press
◄
Dec
to display
the
General Status informat1on.
Note:
the charger can support PB(lead-ac1d) foaming charge First, you
should
�tart the Sc!!ing uf "Trickle" in
•NiMH/NiCd/Pb Trickle" It won' t foam charge until the voltage is less than 2.2SV/cell.
Discharging a Pb battery
Pb DISCHARGE
I .OA
J
2.0V(6P)
Dischargmg Pb battery. The left side of tht 1irst line shO\� the trpe of battery(Pb).
The second line sho\.,,S the charge current on the left and number of cells on the right.
After setting the current and voltage press
Start/Enter
for more: than 3 ScLonds to start
the discharging.
Charge current: 0.05 -7A
Hatterycells: I -12P(l-2•1V)
Status deiplay. Press
Start/Enter
to
adJust the disch
arg
e
current
And press
Inc► or◄Dec
to
increase or decrease the charge current. S1ore the new value by pressing
Start/Enter
again.
You
can stop the process at any time
by
pressing
Batt type/Stop-
Press
◄
Dec
10
display the General Status informa1ion.
18
