NiCd/NiMH forming charge
This forming charge program aims to eliminate capacity imbalance between cells in J ba1tery.
The charger first charges with constant current(CC=!C) according to the user setting. When the charging voltage reaches
the peak threshold( l.<18V/cell) it switches to the
CV
phase. !n the CV phase the current gradually fails. When the current
drops to C/4 the charger will charge another 25% Capacity at C/10 current and then terminate the process.
NiMHForming CHG
t.OAh 7 .2V(6S)
The left side of the first line shows the type ofbatter(NiCd/NiMH). The value on the
left side of second line sets the cell capacity and the value on the right side of second
line sets the cell count and nominal voltage of the battery pack. Press Start/Enter for
more than 3 seconds to start charging.
Fom1ing capacity: 0.1 •9.9Ah
Cell count: I -17S
Forming status. You can stop the process at any time by pressing Batt type/Stop, and
display the General Status information by p
r
e
ssing
◄
Dec
button.
Note: In the first period(CV charging), it displays •cttG• / •PRM•
alternately in Work State. It will display
•PRM•
when in the second
period(CC charging).
17
