Turnigy B405, Руководство по эксплуатации

Страница: 14 / 16

- 14 -
Starting Charge
(
Continued
)
Warranty and Service
We warrant this product for a period of one year
(
12 months
)
from the date of purchase
.
This guarantee applies to materials or operational defects
,
which are present at the time
of purchasing the product
.
During that period we will replace
,
without service charge
,
any product deemed defective due to those causes
.
You will be required to present
proof of purchase ( invoice or receipt ). This warranty does not cover the damage due
to wear , overloading , incorrect handling or use of incorrect accessories .
The battery is connected backwards
(
reverse polarity
)
to the output
.
Re
-
connect the battery to the charger
’
s output with the correct polarity
.
The battery has become disconnected during charge
.
Re
-
establish a
good physical connection between the battery and charger
,
and re
-
start
the charge
.
Some type of electronic interuption or malfunction has occoured
.
If you
believe that some external force might have caused the charger to Err
,
and that a true circuit malfunction has not occoured
,
you might attempt
a re - start charge . Otherwise , if you believe the charger is not functioning
properly
,
disconnect the battery from the charger
,
and the charger from
the input power source and contact your retailer for further details
.
The battery is full
.
The 180 minute backup safety timer has expired . You can re - start the
charge or disconnect the batery from the charger
.
Balance voltage error
.
When charging Li
-
XX with the balance cable
connected to the charger and the balance cell voltage is more or less
than the acceptable voltage for each cell this error will occur
.
The charger has somehow fallen out of calibration
.
Li - XX Bat Low and Hi voltage error . When pack voltage of the connected
lithium battery is not certain .