manualshive.com logo in svg

Turner BioSystems GloRunner, Руководство по эксплуатации

Поделиться
Скачать
Turner BioSystems GloRunner Скачать руководство пользователя страница 23

www.turnerbiosystems.com

23

APPENDIX B - LED Messages and Firmware Upgrades

LED Lights

There are 3 LED status lights on the front panel of the GloRunner

.

v

 

The green LED is the power indicator.  When it is illuminated the
instrument is powered and ready.

v

 

The yellow LED indicates communication errors between the
GloRunner

 and the computer. An illuminated yellow LED indicates

no communication between the computer and instrument is being
made. This can occur under the following circumstances:

§

 

The GloRunner

 is powered on and the User Interface is not

open on the computer.

§

 

The GloRunner

 is powered on and the RS-232 is not

connected to the computer.

v

 

The red LED indicates other types of errors.  When the red LED is
illuminated a potentially serious error has occurred.  At this point you
should contact Turner BioSystems technical support for further
instructions.

Firmware Upgrades

 The GloRunner

 Microplate Luminometer has the capability to download new

firmware to the instrument from the PC. This capability is reached through the
Utilities Menu (Figure 27). This is a password protected function to prevent
accidental use.  The main purpose of firmware upgrades is to add new
capabilities to the system. When a new version firmware is needed in the future,
you will receive specific instructions on how to perform the upgrade.

Figure 27

Содержание GloRunner




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды