6
Figure 12
Figure 13
7. FINISHING THE
INSTALLATION
1. Tuck connections neatly into ceiling outlet box.
2. Slide the canopy up to mounting bracket and
place the key hole on the canopy over the screw
on the mounting bracket, turn canopy until it
locks in place at the narrow section of the key
holes. (Fig. 12)
3. Align the circular hole on canopy with the
remaining hole on the mounting bracket, secure
by tightening the two set screws.
NOTE:
Adjust
the canopy screws as necessary until the canopy
and canopy cover are snug.
WARNING:
MAKE SURE THE TAB ON THE
HANGING BRACKET PROPERLY SITS IN THE
GROOVE IN THE HANGER BALL BEFORE
ATTACHING THE CANOPY TO THE BRACKET
BY TURNING THE HOUSING UNTIL IT DROPS
INTO PLACE.
8. ATTACHING THE FAN
BLADES
Step 1 Attach the blades to the blade brackets
using the screws and fiber washers provided as
shown in Figure 13. Start a screw into the bracket,
but do not tighten. Repeat for the other 2 screws
and washers.
Step 2 Tighten each screw securely starting with
the center screw. Make sure the blade is
straight.
Step 3 Fasten blade assembly to motor using the
screws supplied. (Figure 13).
Outlet box
Ceiling
mounting
bracket
Screw
Screw
Canopy
Canopy
bottom cover
Screw
Fiber
washers
Screws
Blade
Blades bracket
