Turin TU-SB-979-48-36-R, Инструкция по установке и эксплуатации

Страница: 73 / 118

1. Slide door stopper (1) onto end of top rail (2) See figure 1. The bumpers on door
stopper (1) should be positioned on the top of top rail for final installation. Note:
One door stopper comes pre-assembled on top rail between fixed glass bolt
assembly. See figure 1.
2. Position the top rail (2) and fixed glass (3) as shown in figure 2 and connect fixed
glass (3) to top rail (2) following the assembly sequence shown in figure 2. Note
in figure 2, one door stopper (1) should be positioned between mounting holes in
top rail (2) before connecting top rail to fixed glass.
NOTE: TOP RAIL IS ATTACHED TO THE INSIDE OF FIXED GLASS.
3. Slide the rail end assembly (6) onto end of top rail (2) to be connected shower
wall. Loosely tighten the rail end assembly (6) into place on top rail (2) making
sure the rail end assembly is fully engaged on top rail. See figure 3.
4.
Locate the rail mount assembly (8) and remove the stainless steel fitting and
glass connector parts from the metal sleeve. Loosen the set screws in metal
sleeve and slide onto end of top rail (2) making sure the end of sleeve which is
threaded is facing toward end of top rail. Loosely tighten set screws in metal
sleeve to secure. See figure 4-1
Next assemble the stainless steel fitting and glass connector parts to top hole in
return glass panel (5), following the assembly sequence shown in 4-2. The
stainless steel fitting should be positioned to the inside of return glass panel (5)
when complete.
5. Position the top rail/ fixed glass assembly into place in your shower. Loosen the
set screws in rail mount (8) next to glass panel (5). Next connect rail mount (8)
to stainless steel fitting by threading rail mount and stainless steel fitting together
and tighten into place. Tighten set screws in rail mount to secure to top rail (2).
See figure 5.
NOTE: THE TOP RAIL ATTACHED TO FIXED GLASS SHOULD BE POSITIONED
TO INSIDE OF SHOWER.
6. Using a level, verify the top rail (2) is horizontal and the fixed glass (3) is plumb,
mark the rail end (6) location on wall. See figure 6-2
7. Insert the Fixed glass(3) into the Vertical channel (23). Mark the position of
Vertical channel (23) on shower wall.Position the Vertical channel (23) with
marked line on shower wall and mark the hole locations for attaching the Vertical
channel (23) to the shower wall. See figure 7
13