TURFCO 85809 Скачать руководство пользователя страница 5

Страница: 5 / 80

85809

TRADEMARKS AND PATENTS

To order parts, or to arrange repair service, contact

the nearest authorized TURFCO dealer. For a list

of authorized TURFCO dealers in your area, or for

additional information regarding the WIDE

SPIN

1540

EC Broadcast Top Dresser, direct inquiries to:

TURFCO Mfg. Inc.

1655 101st Avenue NE

Minneapolis, Minnesota 55449-4420 USA
Telephone (763) 785-1000

FAX (763) 785-0556

Internet - turfco.com

E-Mail - [email protected]

Registered Trademarks and Patents

WIDE

SPIN

™ 1540 EC is covered under U.S. Patent 6,149,079, 6,508,419 and 6,817,552

Additional Patents Pending

TURFCO

and Mete–R–Matic

are registered trademarks of Turfco Manufacturing, Inc.

WIDE

SPIN

™, LIGHTSPREAD™ and HEAVYSPREAD™ are trademarks of Turfco Manufacturing, Inc.

BRIGGS AND STRATTON

is a registered trademark of Briggs and Stratton Corporation

How To Obtain Parts and Service

To ensure safety and proper operation, always purchase

genuine TURFCO replacement parts from an authorized

TURFCO dealer. Replacement parts from other sources

may damage the WIDE

SPIN

1540 EC Broadcast Top

Dresser and/or create a safety hazard. Always refer

repairs to properly trained service personnel.
DO NOT ALTER the WIDE

SPIN

1540 EC Broadcast Top

Dresser in any manner. Unauthorized alterations may

affect its operation, performance, and may result in injury

or death to the operator as well as other individuals in

the work area.

THE ENGINE EXHAUST FROM THIS PRODUCT CONTAINS CHEMICALS KNOWN

TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER

REPRODUCTIVE HARM.

OPERATE ONLY IN AREAS WITH ADEQUATE VENTILATION. DO NOT OPERATE

ENGINE IN ENCLOSED AREAS.

WARNING

Noise Emission Level:

Operator Position

Sound Pressure (LpA) =

83.4 dBA

Sound Pressure Level (LwA) =

100 dBA

Operating Conditions:

Engine Full Throttle, Spinner and

Conveyor Belt Operating, Hopper

Empty, Unit Moving

Содержание 85809

















































































Результаты поиска

Содержание 85809

Отзывы:

Похожие инструкции для 85809

Бренды по названию

Популярные бренды

TURFCO 85809, Руководство оператора

Результаты поиска

Содержание 85809

Отзывы:

Похожие инструкции для 85809

Бренды по названию

Популярные бренды