TM
10
85809
SETUP AND ASSEMBLY
INSTALLATION OF HOPPER TO THE WIDE
SPIN
1540 EC FRAME
(See Figure 4)
Step 7.
Set the hopper assembly on the 1540 EC
frame. The hopper seals should be inside of the
frame and on top of the conveyor belt.
● Line up the TOP ROW of holes in the hopper seals
to the holes in the frame.
● Check the front seal, it should be on top of the side
seals. Check the side seals, they should extend
past the hopper, along the side of the frame.
Step 8.
Attach the hopper to the frame using 1/4” x
5/8” hex head Whiz-Lock screws and nuts (Quantity
16).
● Insert the screws from the inside of the hopper and
the nuts on the outside of the frame.
DO NOT
TIGHTEN THE SCREWS AT THIS TIME.
Step 9.
Attach the extensions of the side seals to the
frame using the seal retainer strips. Use 1/4” x 5/8”
hex head screws and nuts (Quantity 4).
● Insert the screws thru the seal retainers and the nuts
on the outside of the frame.
● The inside of the bend on the seal retainer strips
should face in toward the seal. Tighten screws
securely.
FIGURE 4
1540 EC
WIDE
SPIN
FRAME
HOPPER
ASSEMBLY
SIDE SEAL
EXTENSIONS
1/4"
NUTS
1/4" X 5/8" HEX
HEAD SCREWS
SEAL
RETAINER
1/4"
NUTS
SEAL
RETAINER
1/4" X 5/8"
HEX HEAD
SCREWS
REMOVE SPINNER SHIELD
AS85809-03
