turck RU130-M18 Series, Инструкция по эксплуатации, Страница: 8 / 45

Product Description
Device overview
8
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
4 Product Description
The devices are contained in a metal housing with an M18 or M30 male thread. The sonic trans-
ducer surface can be installed flush with the surrounding area.
All devices are provided with a metal M12 male connector for connecting the sensor cable. A
switching distance can be set for object detection, which must be less than or equal to the
maximum detection range, and greater than the minimum switching distance.
The devices can be set via the pushbuttons, teach adapters or by manual bridging, depending
on the design.
The Standard ultrasonic sensors are available both without integrated operating elements and
also with two setting buttons. The devices are provided with two programmable switching out-
puts that can be set as NO or NC contacts. The start and end point of the switch window can be
set for both switching outputs. The switch window must be within the detection range. The
devices can be used as diffuse mode or retroreflective sensors.
4.1 Device overview
M12 × 1
60
15
LED
24/4
M18 × 1
20 Nm
M12 × 1
60
15
LED
36/5
M30 × 1.5
20 Nm
Fig. 1: RUxxU-M18E-2UP8X2-H1151
(without teach button) Fig. 2: RUxxU-M30M-2UPN8X2-H1151
(without teach button)
M12 × 1
75
15
LED
36/5
M30 × 1.5
20 Nm
M12 × 1
77
15
17.3
LED
M18 × 1
24/4
20 Nm
Fig. 3: RU300U-M30M-2UP8X2-H1151
(without teach button) Fig. 4: RUxxxU-M18ES-2UP8X2-H1151