turck PD20-UHF, Инструкция по эксплуатации

Страница: 15 / 46

V02.00 | 2018/11
15
7.3 Perform Scan
„ Press the Scan button on the start screen.
a The handheld starts the search for UHF tags in the detection range. The Turck RFID app
opens the
Scan screen.
a The handheld indicates each detected tag with an audible signal.
a
The EPCs of the detected tags are displayed and can be edited. Further information on
this is provided in the section “Reading and writing data”.
Fig. 4: Turck RFID app: Scan screen
Interrupting a scan
„ Press Pause .
a The scan is interrupted and can be continued at a later time. The displayed time contin-
ues running.
Aborting a scan
„ Press the Stop button.
a The scan is aborted. The displayed time is reset with the next scan. The read EPCs can be
sent by email.