turck FS100 L Series, Инструкция по эксплуатации

Страница: 26 / 34

Setting
Setting via touchpads
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
V02.00 | 2022/08 | 26
Output FLOW: NO/NC changeover
The switching outputs can optionally be used as normally open or normally closed. If the
sensor has more than one switching output, the outputs can be configured differently. Each
switching output is configured as normally open by default.
Menu LED indicator bar
Display of the current (active) output function:
NO (normally open)
NC (normally closed)
A Changing the FLOW output from NO to NC
LEDs 5…7 off (NO), LEDs 4 and 8 flash green.
Change the output function from NO to NC:
„ Press and hold [SET] for at least 3 s until LEDs 4 and 8
first flash green quickly and then return to a constant
green.
+
Hz
+
Hz
„ Press [SET].
ð LEDs 4…8 are green (NC).
„ Save the output function: Press [Enter].
ð LED bar briefly flashes green twice. The next menu
appears.
2x
B Changing the FLOW output from NC to NO
LEDs 4…8 are green (NC), LEDs 4 and 8 flash green.
Change output function from NC to NO:
„ Press and hold [SET] for at least 3 s until green LEDs 4
to 8 first flash green quickly and then return to a
constant green.
+
Hz
+
Hz
+
Hz
+
Hz
+
Hz
„ Press [SET].
ð
LEDs 5…7 off (NO)
„ Save the output function: Press [Enter].
ð
LED bar briefly flashes green twice. The next menu
appears.
2x