turck FS100 L Series, Инструкция по эксплуатации

Страница: 15 / 34

Commissioning
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
V02.00 | 2022/08 | 15
7 Commissioning
After switching on the operating voltage, the DeltaFlow function monitors the warm-up phase
of the sensor. During this phase, the LED indicator bar flashes yellow and the two output LEDs
FLOW and TEMP are switched off.
The warm-up phase is deemed to be complete:
n
If the period of 30 seconds that is allotted for the warm-up phase has elapsed.
n
If the system is in a stable condition, i.e. the change in flow rate is sufficiently small.
After the warm-up phase, the device is ready for use and automatically switches to display
mode for the flow speed.