turck FS100 L Series, Инструкция по эксплуатации

Страница: 22 / 34

Setting
Setting via touchpads
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | more@turck.com | www.turck.com
V02.00 | 2022/08 | 22
9.2.3 Quick-Teach — setting the current flow speed as the switching point
With the Quick-Teach function, the current flow speed can be directly taught in as the switch-
ing point FLOW for devices with a switching output; setting a separate MAX/MIN indicated
range is not required.
The Quick-Teach function for teaching in the switching point is marked in the flow chart with
1
.
Menu LED indicator bar
Setting the current flow speed as the switching point
1 Operate the flow speed in the application at the upper limit
value.
2
„
To access the menu from display mode: Press [ENTER]
once.
ð DeltaFlow active: LED 11 in the LED bar is flashing
yellow. System has not yet stabilized.
„ Wait until the LED is flashing green.
„ Once the LED bar is flashing green, the system has sta-
bilized: Press [ENTER] for 3 s until only LED 6 is flashing
yellow.
a The current flow speed is taught in as the switching
point.
3 Optional: Change the switching point incrementally by 0.5 %:
„
Increase the switching point incrementally by 0.5 % of
the measuring range end value: Press [SET].
„ Reduce the switching point incrementally by 0.5 % of
the measuring range end value: Press [MODE].
4 „ Store the switching point: Press [Enter].
a LED bar briefly flashes green twice.
2x
9.2.4 MAX/MIN teach-in — setting the switching point for flow
With the MAX/MIN teach-in function, the FLOW switching point is taught in as a percentage
value within an adjustable MAX/MIN indicated range for devices with a switching output.
The MAX/MIN teach-in function for setting the switching point is marked in the flow chart with
2
.
„
To open from display mode: Press [MODE] once.
Menu LED indicator bar
Setting the switching point for flow monitoring
1 Press and hold [SET] for 3 s until the switching point LED first
flashes yellow and then changes to a constant yellow again.
2 Set the switching point:
„ Increase the switching point incrementally by 9.1 %:
Press [SET].
„ Reduce the switching point incrementally by 9.1 %:
Press [MODE].
3 Store the switching point:
„
Press [Enter].
a
LED bar briefly flashes green twice.
2x