turck CMVT Series, Инструкция по эксплуатации

Страница: 13 / 29

V01.01 | 2022/03
13
5 Installing
NOTE
Ensure the rigid installation of the device in order to prevent inaccuracies caused by
vibration. Protective covers can likewise reduce accuracy.
The maximum tightening torque of the screws is 3 Nm.
„ Align one of the three measurement axes of the device to the direction of vibration.
„ Position the device as close as possible to the vibration source.
„ Clean the installation surface and the surrounding area.
„
Position the potted side of the device on an even surface so that the potting compound
is covered.
„
Fasten the device with two screws.
Z
Y
X
4 mm
3 Nm
4 mm
3 Nm
Z
Y
X
Fig. 5: CMVT-QR20-IOLX3-H1141 –
installation and measurement axes Fig. 6: CMVT-QR20-IOLX3-RS4 –
installation and measurement axes