turck 6901041, Инструкция по эксплуатации

Страница: 18 / 25

Setting
Setting via IO-Link
18
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
9 Setting and Parameterization
9.1 Settable functions and features
The following functions and properties can be set and used via the IO-Link interface:
n
Set the start of the measuring range (zero point): The gradient of the output characteristic
stays the same.
n
Setting the process data
– Normal mode: In Normal mode, 16-bit process data corresponds to 65535 increments.
The measuring range is resolved in the increments. Three diagnostic bits are provided
for the resonance coupling.
– Compatibility mode: The measuring range is resolved in 1 µm increments. 32 bits are
provided.
9.2 Setting via IO-Link
The device can be parameterized within the technical specifications (see data sheet) via the IO-
Link communication interface – both offline, e.g. with the configuration tool as well as also on-
line via the controller. An overview of the different functions and properties that can be set and
used for IO-Link mode can be found in the chapter “Setting” and in the IO-Link parameter
manual of the device. Detailed instructions on the parameterization of devices via the IO-Link
interface are provided in the IO-Link commissioning manual.
All the parameters can changed in IO-Link mode via the controller during commissioning as
well as during operation.