Turbosound TFS-780 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 53

background image

user manual

TFS-780

TFS-780 user manual

Page 5

equipment from different sources may therefore be freely combined without difficulty. This
provides Flashlight system owners with a considerable competitive advantage in servicing
the requirements of international touring productions, and in co-operating with other
Flashlight suppliers within the worldwide network.

The system is supplied as multiples of a unit package comprising 12 enclosures (6 bass and 6
mid-high), a single rack of four dual-channel power amplifiers, two loudspeaker management
system controllers, flying hardware, and all the requisite cables and connectors. Two of
these packages (or 24 bass and 24 mid-highs) will provide a formidable system for distant
audience coverage in large arenas, and can be integrated with Turbosound Floodlight
enclosures for short and medium range coverage. This set of components also forms a
standard building block for the construction of spherical arrays.

The controller functions as an electronic loudspeaker management system, comprising a
24dB per octave crossover, with factory preset limiters matched to the power amplifiers,
digital time-alignment and electronically balanced inputs and outputs. The power amplifiers
are supplied as a set of four in a 19" rack with all necessary wiring and multi-pin connectors.

The loudspeakers are of six types, of compatible dimensions but with differing frequency
ranges, projection capabilities and dispersion patterns:

TFS-780L low frequency enclosure

The TFS-780L low frequency enclosure covers the sub-bass and bass ranges up to 150 Hz. It
contains a single 21" drive unit with a 6" voice coil, loaded with a TurboBass



device. The

TFS-780L combines relatively compact dimensions and low weight with the ability to provide
beneficial low frequency coupling when used in multiples. The enclosure may be ground-
stacked or flown.

TFS-780H mid-high enclosure

The TFS-780H enclosure covers frequencies above 150 Hz and contains three drive units. A
large TurboMid



device containing a very powerful 12" driver covers frequencies from 150Hz

to 1.3kHz. A smaller TurboMid



device containing a specially developed 6½" cone driver

covers the range from 1.3kHz to 8kHz. The remaining frequencies above 8kHz are covered by
a 1” compression driver on a waveguide horn specifically designed for this purpose. All three
drive systems are designed to have a narrow dispersion angle of 25º horizontal x 25º vertical.
This high Q provides the projection necessary for true

long throw applications such as large

arena and outdoor productions.

The TurboBass



and TurboMid



devices are unique to Turbosound and are covered by

principle patents world-wide. They utilise specialised forms of horn loading which provide

«
...
3
4
5
6
7
...
»

Содержание TFS-780






















































Отзывы:

Нет отзывов

Похожие инструкции для TFS-780

Бренд: Gear Light Страницы: 2

Бренд: RAB Lighting Страницы: 2

Бренд: Elation Страницы: 13

Quartz Flood Q500 Series

Бренд: Hubbell Страницы: 2

Slim line Series

Бренд: Walther Страницы: 2

Бренд: Magicfx Страницы: 24

Бренд: kim lighting Страницы: 3

FLASH-COLOR-STROBE

Бренд: Ibiza Страницы: 26

Бренд: Black & Decker Страницы: 12

Бренд: Black & Decker Страницы: 4

BRIGHT BAR WLB36B

Бренд: Black & Decker Страницы: 11

Rechargeable Bright Bar WLBFHB

Бренд: Black & Decker Страницы: 19

Бренд: Black & Decker Страницы: 40

Бренд: Black & Decker Страницы: 32

Бренд: Black & Decker Страницы: 56

Бренд: Black & Decker Страницы: 64

Бренд: Black & Decker Страницы: 56

Бренд: Black & Decker Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды