Turbosound TFS-780 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 53

background image

user manual

TFS-780

TFS-780 user manual

Page 6

exceptionally low distortion and high efficiency from cone-type drive units. The subjective
effect of these devices is greater clarity and transparency of reproduction when compared
with conventional compression drivers and horns. All the cone drive units have been
designed specifically for the Flashlight system and are manufactured exclusively for
Turbosound.

The TFS-780H is fully equipped for all touring applications with a hinged rear access door,
integral multi-way speaker cable, keyhole flyplates, removable wheel board, ergonomically
placed flush handles, weatherised birch plywood construction and optimised truck-pack
dimensions. The TFS-780H enclosure is exactly the same size as, and of very similar weight
to, the TFS-780L.

TFL-760H mid-high

The TFL-760H is a three-way medium dispersion mid-high enclosure that gives outstanding
transient ability over a 50

°

horizontal coverage angle.

The use of specialised cone-type transducers, in combination with unique Axehead™
technology, results in high efficiency, accuracy, very low levels of distortion, even dispersion
and exceptional intelligibility, enabling it to be considered for a multitude of near and mid
field applications.

The TFL-760H is fully equipped for touring with a hinged rear access door, integral multi-way
speaker cable, heavy duty wheels, ergonomically placed flush handles, weatherised birch
plywood construction and optimised truck-pack dimensions. The TFL-760H shares the same
height and width as the Flashlight TFS-780H, and the positions of the keyhole fly plates allow
use of the highly advanced and well proven Flashlight flying systems. All of these features
combine to give a system unsurpassed in simplicity, ease and speed of handling and long
term durability.

The TFL-760H covers the frequency range from 180Hz upwards. The loudspeaker
complement consists of a very powerful low-mid 12" cone loudspeaker which, combined
with the Axehead



wave guide, handles frequencies between 180Hz and 1.3kHz. The high-

mid band between 1.3kHz and 8kHz is covered by a similar combination based on a
specialised 6.5" loudspeaker. The remaining high frequency band, 8kHz to in excess of 20kHz,
is handled by a 1" HF compression driver. Perfect time alignment is achieved by the careful
positioning of these three components and their waveguides within the enclosure. The TFL-
760H is used to augment Flashlight systems where certain sections of a venue dictate wider
coverage and shorter throw.

The TFL-760H also makes an excellent flown or ground stacked stage side fill system due to
its tight vertical coverage.

«
...
4
5
6
7
8
...
»

Содержание TFS-780






















































Отзывы:

Нет отзывов

Похожие инструкции для TFS-780

Бренд: Beaba Страницы: 28

SPARTAN SPX-HP15K

Бренд: Raytec Страницы: 12

Бренд: Lumapower Страницы: 4

Predator Medium Floodlight Wet Location

Бренд: HOLOPHANE Страницы: 5

Бренд: Night Stick Страницы: 5

Бренд: KSR Страницы: 2

Бренд: B-K lighting Страницы: 4

Бренд: Kandolite Страницы: 17

Бренд: Spectronics Corporation Страницы: 2

Бренд: Mactronic Страницы: 2

Бренд: Dive Rite Страницы: 4

Бренд: Sealey Страницы: 2

Бренд: Versonel Страницы: 17

ENFORCER VI-B1003-SBQ

Бренд: SECO-LARM Страницы: 2

FLEXLiTE TX Series

Бренд: Kemppi Страницы: 73

Бренд: XanLite Страницы: 2

Бренд: Yarkiy Luch Страницы: 2

Бренд: ORCATORCH Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды