background image

 

e-Boost-40/60 Instructions 

 

Page 13 

PART NUMBER 

FG-EBOOST-

40/60

 

TURBOSMART 

ONE YEAR LIMITED WARRANTY 

Turbosmart is a company built on Customer Satisfaction and Service. That is why all of our products go through regimented test procedures before they are packaged 

and shipped. Turbosmart stands behind its products for one full year after purchase. Terms of Warranty, Service and Returns are as follows: 

Limited Warranty: 

Turbosmart warrants its products to be free from defects in material and workmanship under normal use and if properly installed for a period of one 

year from date of purchase. If found to be defective, it will be replaced or repaired if returned prepaid along with proof of date of purchase. This shall constitute the sole 

remedy  of  the  purchaser  and  the  sole  liability  of  Turbosmart  to  the  extent  permitted  by  law,  the  foregoing  is  exclusive  and  in  lieu  of  all  other  warranties  or 

representations  whether  expressed  or  implied,  including  any  implied  warranty  of  merchantability  or  fitness.  In  no  event  shall  Turbosmart  be  liable  for  special  or 

consequential damages. This warranty is only valid on products purchased from Turbosmart Authorized Dealers.  

Service: 

After the warranty period has expired, repair service is charged based on a minimum and maximum charge rate. (Contact Customer Service for current rate).  

Returns:

  When returning  a  Turbosmart  product  for repair,  it  must  be  accompanied  by  a  completed  Customer  Warranty  Form  and  RMA  number. To  access  this  form 

please go to our website 

www.turbosmartonline.com

 and you will find it on the Downloads page. 

 

THE TURBOSMART PLEDGE 

 

DO NOT USE ANY TURBOSMART PRODUCT UNTIL YOU HAVE CAREFULLY READ AND UNDERSTOOD THE FOLLOWING AGREEMENT. 

Please call if you have any questions or do not understand this agreement. Refer to our brochure, website or catalogue for terms and conditions and further information 

regarding your product. Turbosmart appreciates your business and pride ourselves on our customer service. We are always happy to offer you advice and will provide 

you with help in any way we can. The purpose of this agreement is to avoid any problems or hard feelings. 

 

We sometimes make mistakes, as do our dealers, distributors and suppliers. Even customers can sometimes order the wrong parts. Do not use, modify, install, trial 

assemble,  nick,  drop,  scratch  or  adjust  any  part  until  you  first  check  for  any  damage.  Damage  must  be  reported  immediately.  NO  EXCEPTIONS.  If  there  are  any 

components  missing  please  contact  your  authorized  reseller  immediately  upon  receipt  of  your  shipment.  Missing  components  must  be  reported  within  five  (5) 

business days of receipt. Parts returned for any reason MUST BE IN RESALABLE CONDITION. It is YOUR responsibility, “THE CUSTOMER” to carefully package any 

returns to avoid shipping damage. Insurance is highly recommended. Credit cannot be issued for damaged goods. 

 

Turbosmart warranties  the  quality  of the  products  it  designs  and  manufactures to  be free  of  defects  in  material  and workmanship. This  limited warranty  is  extended 

only to the original purchaser and may not be transferred or assigned. This limited warranty applies to any product, which after careful inspection by Turbosmart, after 

receipt of the product from our authorized reseller, is found to have a defect in either material or workmanship. Any modifications to the product will void any and all 

warranties and will not be exchanged. Before installation, check new car warranty. Turbosmart is not responsible for voiding any original manufactures warranty. 

 

All  warranty  claims  must  be  returned  to  the  nearest  Turbosmart  Office,  you  must  return  the  product  and  sales  receipt,  at  your  own  expense,  accompanied  by  the 

Customer Warranty Form stating the reason for the claim. Proof of purchase must be provided with any warranty claim and will be verified with the authorized reseller 

from which the product was purchased. 

 

If  all  the  above  procedures  are  followed,  and  the  product  is  found  to  be  defective  in  either  workmanship  or  material,  Turbosmart  shall  either  repair  or  replace  the 

product,  at  its  sole  discretion,  and  sole  cost.  This  limited  warranty  does  not  cover  or  apply  to  any  personal  injury,  labor  charges  or  any  other  incidental  costs  or 

damages caused by the defective product. The individual purchaser acknowledges and agrees that the disclaimer of any liability for personal injury is a material term 

for this  agreement  and the  individual  purchaser agrees to  indemnify Turbosmart and to  hold Turbosmart harmless for any  claim related to the  item  of the  equipment 

purchased. Under no circumstances will Turbosmart be liable for any damages or expenses by reason of use or sale of any such equipment. 

 

THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY, WHICH APPLIES TO TURBOSMART PRODUCT AS EXPRESSLY GIVEN IN LIEU OF ANY OTHER 

WARRANTY EXPRESSED OR IMPLIED, INCLUDING THAT OF MERCHANTABILITY. ANY IMPLIED WARRANTY INCLUDING THAT OF MERCHANTABILITY AND/OR 

FITNESS  FOR  A  PARTICCULAR  PURPOSE  IS  HEREBY  LIMITED  BY  THE  SAME  TERMS  AND  TIME  LIMITATIONS  SET  FORTH  IN  THIS  LIMITED  EXPRESS 

WARRANTY  AND  OTHERWISE  EXCLUDED.  EXCEPT  FOR  THOSE  OBLIGATIONS  ASSUMED  HEREIN,  TURBOSMART  ASSUMES  NO  OTHER  OBLIGATIONS  IN 

CONNECTION WITH THE SALE OF ITS PRODUCTS.  

IN THE EVENT THAT THE INDIVIUDAL  PURCHASER DOES NOT AGREE  WITH THIS AGREEMENT THE BUYER MAY PROMPTLY RETURN THIS PRODUCT, IN A 

NEW  AND  UN-USED  CONDITION,  WITH  A  DATED  PROOF  OF  PURCHASE,  TO  THE  PLACE  OF  PURCHASE  WITHIN  SEVEN  (7)  DAYS  FROM  THE  DATE  OF 

PURCHASE FOR A FULL REFUND. THE INSTALLATION OF THIS PRODUCT INDICATES THAT THE INDIVIDUAL PURCHASER HAS READ AND UNDERSTOOD THIS 

AGREEMENT AND ACCEPTS ITS TERMS AND CONDITIONS. 

 

Happy motoring! 

The Turbosmart Team. 

 

Head Office

: Turbosmart Pty Limited, PO Box 264 Croydon, NSW, 2132 Australia 

Ph: +61(2) 9798 2866 

Fax: +61 (2) 9798 2826 

Email: 

[email protected]

  

USA Office:

 Turbosmart USA, 1185 Park Center Drive, Suite Q, Vista CA 92081 USA 

Ph: (760) 727 7610 

Fax: (760) 727 7963 

Email: 

[email protected]

 

 

Содержание e-Boost-40/60














Отзывы: