
21
3.
Check the screen to confirm vacuum and sealing time according to the type of food
and bag.
4.
Pull down the cover and touch “Vacuum&Sealing” button to start the unit start to va-
cuum and will seal the bag automatically . The vacuum screen display counts down to
“0” ,then the seal screen display counts down to “0”,then “vacuum&sealing” and “sealing”
indicator LED flashes a few seconds,indicator LED off if finish.
Note: The appliance reaches a very high vacuum pressure during the vacuum sealing process. In or-
der to avoid that sensible contents is influenced by the high pressure, keep an eye also on the vacuum
gauge and press the Manual Seal button, if you want to interrupt the process before time. In such
case, the appliance turns off the pumping and switches to sealing of the vacuum bag.
6.
Lift the handle to open the cover and take out the packed bags
NOTE: For best sealing effect, it is better to let the appliance cool down for 1 minute before using it
again. Wipe out any excess liquid or food residue in the vacuum chamber after each bag packaged.
-The machine can be used continuously.
-Your appliance can work all on the specific bags.
-Cut the bag straight across with scissors to open a sealed bag.
Working on marinate
1.
Put the marinate items on container.
2.
Lift the handle to open the cover and put the container on chamber.
3.
Pull down the cover and touch “Marinate” button to start the unit start to vacuum. The
vacuum screen display counts down to “0” ,then “marinate” indicator LED flashes a few
seconds,indicator LED off if finish one circulation.
The vacuum packaging system # 1
III. Making a bag with bag roll
Put out the power cord and plug to the appliance and a wall outlet,Switch turn “ON”,Va-
cuum screen and seal screen will display working time.Set suitable vacuum and sealing
time.
1.
Pull out the bag roll and cutter to the suitable length you want.
2.
Open the cover put one end of the bag on top of the sealing element and make sure that
the entire short end is under bag fixer.
3.
Pull down the cover and touch “Seal” button to start make the bag. The vacuum screen
flashes display “0” and pump will work a few seconds,then the seal screen display counts
down to “0”,then “sealing” indicator LED flashes a few seconds,indicator LED off if finish.
4.
Lift the handle to open the cover. Remove the finished vacuum bag. The vacuum bag is
now ready to be used for vacuum packing.
II. Vacuum packaging with a bag
1.
Put the items inside the bag.Clean and straighten the open end of the bag, make sure no
dust, wrinkle or ripples.
Note: Expel the extra empty air out of the bag after the bag is placed into the sealing bar inside the
chamber, this is a very important point to get a good vacuum sealed bag.
2.
Open the cover put one end of the bag on top of the sealing element and make sure that
the entire short end is under bag fixer.
Note: When put the bag into the vacuum chamber, Please put the bag mouse encircle the splitter
plate toavoid the air cann’t be draw out completed from the bag
Содержание TS-3500
Страница 1: ...MANUAL DE USUARIO ...
Страница 14: ...14 Vacuum Packing Machine USER MANUAL ...
Страница 25: ...25 ...