Turbolock TL-201 Скачать руководство пользователя страница 22

Страница: 22 / 28

TurboLock TL - 201

Step 3.

Enter the new 4~6 digit user password, and then press the button. The lock will beep to confirm the change. If

desired, test the new password afterwards.

6.4 Deleting all User Passwords

First, make sure the TL-201 is fully unlocked. Then, use the keypad to enter the current Admin Password, then press the button.

The lock should beep and the backlight should turn blue again. Quickly enter ‘4’ and press the button before the light turns off. All

user passwords will then be erased.

6.5 Disguising Your Password

This function is an added security feature aimed at preventing password theft. With Passcode Disguise, you may enter 12 digits into

the keypad. As long as the correct password sequence is entered, regardless of how many digits were entered before or after, the

TL201 will unlock.

For example, if your user password is “0808“, you can enter digits before and/or after you enter “0808” to confuse any unwanted

party who may be watching. In this case, “113540808”, “110808”, “108081”, and “208082256977” and so on will all successfully

open the door while concealing your password.

Section 7

Using the Mute Function

USE WITH CAUTION. Remember to turn off the function when it is no longer needed. Do not leave this function on for

extended periods of time.

Muting/Un-muting

Step 1.

First, make sure the TL-201 is fully unlocked. Then enter the current Admin Password and press the button.

Содержание TL-201




























Результаты поиска

Содержание TL-201

Отзывы:

Похожие инструкции для TL-201

Бренды по названию

Популярные бренды

Turbolock TL-201, Руководство пользователя

Результаты поиска

Содержание TL-201

Отзывы:

Похожие инструкции для TL-201

Бренды по названию

Популярные бренды