TurboLock TL - 201 11
Step 2.
Align the plate on the back of the door while making sure to thread the cables under the latch. Move the cables to
the corner hole of the plate. Thread the latch pin through the larger hole and match up the pegs with the smaller
surrounding holes. Use the 3x mounting screws to fasten the plate to the back of the door. Make sure all screws are
tightened.
(Fig. 5)
•
Check and adjust the plate or cables as needed to make sure the cables are tucked under the latch. Do NOT
force the screw through the cables as this will damage the lock and/or make it unusable.
•
Thread the cables through the opening in the corner of plate.
2
3/4
” 2
3/8
”
2
3/4
”
70
60
2
3/8
”
2
3/4
” 2
3/8
”
2
3/4
”
70
60
2
3/8
”
2
3/4
” 2
3/8
”
(Fig. 5)