●
Using the height of cut between 3/4’’-1’’ will shorten the battery duration.
Blade Maintenance H:
●
Warning! Switch the machine off, remove the isolator key and the battery, and remove the grass box
before adjusting or cleaning the machine.
●
Always wear gardening gloves when handling or working near the sharp blades.
·
Turn the machine on its right side and inspect the blade; if blunt or damaged, replace immediately.
Use the following procedure to remove and re-place the blade:
·
Hold the blade 20 using gardening gloves (not provided) and use a screwdriver (not provided) to remove the
blade bolt 22, blade connector 21 and blade 20.
·
Fit the blade 20, blade washer 22 and the blade bolt 23. Ensure that the blade is the correct direction facing
upward and then tighten the bolt 23 firmly. Ensure the screwdriver is removed before attempting to turn the
machine on.
●
Do not lubricate blade or blade bolt during refitting.
Hand position adjustment I:
Follow step one to set the knob to set the desired tightness in order to adjust the handle. Set the handle to the
appropriate height, then follow step 2 and tighten the knob completely.
Cutting the Grass/Safety Switch J:
This product is equipped with a protective overload when mowing that
protects the motor. A safety switch will activate when the blade is jammed,
clogged or the motor is overheated. Immediately turn off the machine
when this happens.
The safety switch will only reset when you release the handle.
Remove all obstacles, and wait one minute, then restart your machine. The
safety switch will automatically reset.
Always check your mowing path prior to starting the machine and clear
any debris.
J
