Assembly:
For Your Safety:
●
Warning! Switch off, remove the isolator key and the battery before adjusting, cleaning or if cable is cut,
damaged or entangled.
●
The blades continue to rotate for a few seconds after the machine is switched off.
●
Caution –do not touch the rotating blade.
Handle assembly A:
1. Align with the bottom of the handle and the top of the handle as shown in the photo;
2. Screws should be placed from outside to inside;
3. Tighten nuts to secure placement.
Note: Ensure that the cable clips supplied are used to fix the cable to the handle.
Snap together the grass box B:
Place the grass box top with the grass collector-base by engaging the tabs along the edge together. Start your
rear and work your way forward.
