8
C.
COMPONENTS
1
.
Operating the device safely
•
Check the device after unpacking for any damage or scratches on it.
•
Place the unit on a firm, level surface in an area with at least 50cm of free space around it allow for
proper air circulation.
•
Do not operate in close proximity to walls, curtains, or other objects that may block inlet and outlet.
Keep the air inlet and outlet free of obstacles.
•
If tipped more than 45°, allow the unit to set upright for at least 24 hours before start up.
•
Never install the unit where it could be subject to
：
•
Heat sources such as radiators, heat registers, stoves or other products that products that produce
heat.
•
Direct sunlight
•
Mechanical vibration or shock
•
Excessive dust
•
Lack of ventilation, such as cabinet or bookcase
•
Uneven surface
Pushing Handle
Built-in Handle
Big Wheel
Drainage Pipe
Control Panel
Air Inlet
Power Cord
Filter Mesh
Drain outlet
Install the unit in rooms which exceed: 14 m².
Do not install the unit in a place where inflammable gas may leak.
NOTE!
The manufacture may provide other suitable example or may provide additional
information about the refrigerant odour..
