25
Radio Triggers
The radio triggers box enables you to add and remove triggers/telecare sensors for the
resident that is listed in the resident information box.
Add a radio trigger
Click on the resident that requires the trigger/sensor, when their details appear in the resident
information box, click the add icon in the radio triggers box; this will open a new window. In
the add trigger window enter the 6 digit trigger id from the triggers bar code (see image
below). Select the appropriate trigger type, location and a call group (see call groups section).
Finally click the add icon.
Remember to click the save icon in the resident information box after adding or amending any
details associated with an individual resident.
Note:
If a radio trigger has already been added to a resident via the SCP then the details of the trigger will appear in
the web browser these details can then be altered if required.
Remove a radio trigger
To remove a trigger, click on its ID or name in the radio triggers box. A new window will open,
click the delete icon.
Note:
The other settings within the radio trigger screen should not be altered unless full training has been provided.
Advanced Speech Module Settings
Clicking on the icon opens a new window where advanced settings can be viewed and
altered. It is recommended that these settings are only altered by a Tunstall engineer.
Radio trigger label
with ID highlighted
