Tunersys WS161, Руководство пользователя

Страница: 12 / 21

-10-
9. Configuration
Here you will find the complete settings / options available to configure your own tuner. On the
main menu, navigate to Configuration setting. Press OK and you will see a list of options
available.
Wi-Fi Network
• Add / Remove AP
Add AP - It will scan for a list of routers around.
Remove AP - If you have already added a router and want to remove it, choose this option.
Note - Always bring the Amplifier within 2 meters of the Wi-Fi router for best results.
•
AP: [ ]
If you have added more than one routers on the radio and want to switch to another one,
select this option to change.
•
Signal
This is to show the strength of the Wi-Fi Signal of the Wi-Fi router as received by the
radio. Usually signal levels lower than -70dBm is at weaker level and if it affects the
reception of your radio, you may need to optimize the router location or check any
problem of the router itself.
•
IP
The IP is set Dynamic by default. Select to change Fixed IP according to your network
condition.
•
DNS
The DNS is set Dynamic by default. Select to change <Fixed> DNS according to your
network condition.
Wi-Fi Channels
Not all of the Wi-Fi channels are available in every country. There may be variation between
different countries. Therefore it is necessary to choose the Wi-Fi channels to ensure the Wi-Fi
performs satisfactory.
We have already set the channels according to the requirement in different countries. Choose
the country you are staying from the list to get the correct channel.
The
Europe/United Kingdom is set by default, press [OK] on the Remote control or push the
[Tune/Select] knob on mian unit to edit the country selection.
Adjust backlight level when power off and Under night or dark environment
When Power off,You can off or Adjust the Indicator LED Light and backlight level for the display as
you prefer.
press and hold the [ Power/Menu ] knob on main unit or press the [ Power/Menu ] button on
remote to turn off the main unit ， then adjust the backlight level as you like by rotating the [Tune/
Select] knob on mian unit or [ ▲ / ▼ ] button on remote.
There are 24 settings : Level 0 to 24, Can Keep Date and
time display and The Indicator LED light and backlight is
off when Level set to 0
25 May ， 2020 Mon
8
:
50
AM