background image

3

USER MANUAL

TUNWAS12-100

v.1.1

Introduction

4

Specifications

4

Unpacking 

4

Assembly

5

Equipment Identification

6

Safety Guidelines

7  

Operation Guide

9

Maintenance

12

Troubleshooting

13

Environmental Protection

14

WEEE Waste Electrical and Electronic Equipment Statement

14

EC Declaration of Conformity

15

Parts List & Diagram

16

Limited Warranty Statement

18

   CONTENTS

 

 WARNING

Please read all these instructions before operating this product and save them for future use. This manual has been compiled by Tundra Industrial and is an 
integrated part of the product with which it's enclosed. The instructions should be kept with it for the future reference.
 
This manual describes the purpose for which the product has been designed and contains all the necessary information to ensure its correct and safe use. We 
recommend that this manual is read before any operation or, before performing any kind of adjustment to the product and prior to any maintenance tasks. By 
following all the general safety instructions contained in this manual you will help to ensure operator safety and extend the potential lifespan of the equipment.

All photographs and drawings in this manual are supplied by Tundra Industrial to help illustrate the operation of the product. Whilst every effort has been made 
to ensure accuracy of information contained in this manual our policy of continuous improvement determines the right to make modifications without prior 
warning.

Note: 

The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the equipment. Some 

illustrations in this Instruction Manual may show details or attachments that differ from those on your own appliance. Contact your nearest Tundra Industrial  
Dealer if you are unsure about any information included in this manual or require any additional information about the safe use, operation maintenance, or 
repair of this equipment.  

Содержание COLD WASH TUNWAS12-100





















Отзывы: