CK 3000, CK 4000
22
-
In the beginning of sowing monitor the area that can be sown with one full hopper. After
that you can determine the correct filling time according to the area meter.
-
Keep enough seed in the hopper. Due to the form of the hopper bottom it is very important
to observe this, especially in the beginning.
-
Do not keep seed in the hopper for several days, especially not in damp weather. Moist
seed can cause disturbances in feeding.
-
Suitable driving speed during sowing is 7-10 km/h.
16.
SERVICE AND REPAIR
For demanding repairs please contact your dealer. In the following we suggest measures that can
mostly be carried out at the farm. Read the maintenance instructions carefully. If you follow the
instructions your TUME-drill will work without any problems from year to year.
If the maintenance instructions are not followed, the manufacturer does not have any responsibility
on the machine.
Ordering spare parts
Should you need spare parts for the machine you can order them either through your dealer or
directly from the factory. When ordering carefully note the part number which you can find in the
spare part list delivered together with the machine. Thus you ensure that you get the right part.
Please also give the serial number on the shield.
Lubrication
The modern constructions have reduced the need of lubrication to a minimum without having
diminished the durability of the machine.
Lubrication points
Right machine end
→
the roll chains of the transmission must be lubricated every 50 operating
hours with SAE 10 or SAE 20 oil.
Central regulation
→
the threated and gliding surfaces against the lug are lubricated twice a sowing
period
16.1 The most usual repairs
Repairs of seed coulters
The point of the coulter and the coulter tube are removed by unscrewing the nut in the point, by
pulling the nut out of the hole and by pulling the point downward.
