stopped.
7.Cutting Tips:
①
knife in the head as possible to cut plastic, head of the most
sharp.
②
If the blade stuck in the plastic housing is not convenient pull out,
hold the handle on the key, this will be very easy to pull out.
③
Intermittent use will not cause the handle heat, such as a long
time (about 10 minutes) of continuous use could cause the handle
fever,and it is a normal phenomenon, just off the host switch, wait
the handle about 10 minutes to cool, you can continue to use. If
they continue to work in the case of heat ,it can cause burns, but
also to damage the handpiece.
About Maintenance
Please implement regular maintenance on the following section.
Good maintenance can prolong life.
1.Blade clamp and tighten the screws
①
After the blade clamp and tighten the screws to be dirty, a
thorough cleaning, or replacement of parts.
②
Blade clamp and tighten the screws are consumables. If you are
still unable to ultrasonic vibration after cleaning, replace the parts.
