A
63
FIG. 13
Attach two Nylon Pulleys 4 1/2 Rd. (#14-Labeled A, E) to
the
Offset Pulley Bracket (#33)
using two Hex Head Cap Screws
3/8-16 X 1 3/4 (#25), four Flat Washers SAE 3/8” (#17), and two Ny-
lon Insert Jam Lock Nut 3/8-16 (#21).
FIG. 14
Route the cable down and under the Nylon Pulley 4 1/2”
Rd. (#14-Labeled A), then up and over the Nylon Pulleys 4 1/2” Rd.
(#14-Labeled B & C).
FIG. 16
Attach two Nylon Pulleys 4 1/2 Rd. (#14-Labeled D, F) to
the
Base Frame (#28)
pulley brackets using two Hex Head Cap
Screws 3/8-16 X 2 (#24), four Flat Washers SAE 3/8” (#17), and two
Nylon Insert Jam Lock Nut 3/8-16 (#21).
59
63
7
39
5
SP-405 Pectoral Contractor
29
33
A
C
E
33
B
F
28
D
FIG. 8
Attach the
Weight Stack Cable (#39)
to the
Top Plate Se-
lector Bar (#7)
using a Split Bolt 1/2-13 X 1 (#59) and a Split Lock
Washer 1/2” (#63) to the threaded socket of the
Top Plate Selector
Bar (#7).
Fully Fasten:
Proceed to fully fasten this hardware assem-
bly.
Note:
Refer to
Fig B
on fold-out page 10 for further detailed il-
lustration of this assembly.
