FIG. 7
Next, attach the assembled
Adjustable Pulley Bracket
(#45)
to the receptacle of the
Weight Stack Frame (#1)
using one Split
Lock Washer 1/2” (#176) and one Finished Hex Nut 1/2-13 (#89).
1
45
89
176
FIG. 8
Thread one Finished Hex Jam Nut 1/2-13 (#90) and insert
one Split Lock Washer 1/2” (#176) onto the Screw of the
Leg Press
Cable (#55)
. Next, Locate the
Swivel Cable End (#56)
and thread it to
the bolt of the
Leg Press Cable (#55)
.
55
90
176
56
FIG. 9
Next, attach the
Swivel Cable End (#56)
to the
Fulcrum
with Brackets (#52)
using one Hex Head Cap Screw 3/8-16 X 1 3/4
(#101), two Flat Washers SAE 3/8” (#94), one Nylon Insert Jam Lock
Nut 3/8-16 (#123).
52
56
55
FIG. 10
Route the
Leg Press Cable (#55)
around the Pulley 4 1/2
Rd. (#78-Labeled D1). Next, route under then up the Pulley 4 1/2 Rd.
(#78-Labeled D2).
Note
: Refer to the Cable Mapping Diagram on fold-out page 6for
further detailed illustration of the
Leg Press Cable (#55)
routing.
D2
D1
55
3
Leg Press Station
