“Why Is My Spa Constantly Running?”
All Tuff Spas are fitted with state-of-the-art technology that automatically filter your spa as well as
check to ensure the spa is always at the desired temperature. Part of this process is that the spa
pump runs twice a day for at least 1 hour each time to filter. Additionally, the pump runs once
every 30 minutes to verify that the spa is at the correct temperature. So while it may seem the spa is
constantly running, this is simply part of the heating and filtration process. If you still feel the spa
is running constantly, please contact your dealer.
Draining Your Spa
DISCONNECT THE POWER TO YOUR HOT TUB
150, 250, 450, 650 Models:
On the outer side of the spa you, will see a black circular area that has a handle. Simply pull the
handle out and twist off the cap. Attach a garden hose and carefully pull on the part where the hose
and the drain assembly meet. The assembly will pop out approximately ¼” opening the valve. This
is a gravity drain and as such, will be slow so you may not see water draining immediately. If you
need to drain the spa more quickly, you may rent/buy a submersible pump.
350, 550 Models:
Remove the panel below the topside controller and locate the drain hose (3/4” flex pipe with drain
attachment). Remove the drain assembly cap and attach a garden hose. Twist the valve allowing
water to flow out. This is a gravity drain and as such will be slow so you may not see water
draining immediately. If you need to drain the spa more quickly, you may rent/buy a submersible
pump.
DO NOT LEAVE SPA EMPTY FOR EXTENDED PERIODS OF TIME. LEAVING THE
SPA EMPTY MAY RESULT IN THE JET HOUSING GASKETS DRYING OUT,
CAUSING LEAKS AND/OR WARPING. THIS TYPE OF DAMAGE IS NOT COVERED
UNDER THE WARRANTY.
Содержание Filbur FC-0125
Страница 1: ...OWNER S REFERENCE GUIDE NORTH AMERICA ...
