Hard Top Covers
1.
Hot and cold weather natural causes the material to expand and contract which may allow
for gaps and/or inconsistencies between the cover and spa. As long as the seal sits on the top
edge of the spa any inconsistencies or small gaps around the edge of the cover will not affect
the ability of the cover to retain heat and is purely aesthetic.
2.
The high-grade resin from which the spas are constructed can be easily cleaned with a mild
soap and water solution.
3.
Any bolts/screws on the cover may need to be tightened on occasion, depending on use.
Soft Top Covers
1.
Soft top covers are composed of a vinyl skin and high density foam insert. They have straps
and two part clips which are attached to the spa.
2.
The vinyl surface can be cared for with any mild household cleanser or products made for
the care and maintenance of vinyl products.
Cleaning Your Tuff Spa
1.
The filter should be cleaned every 3-6 months with your garden hose. You may also choose
to use a filter cleaner. Follow the directions provided with the cleaner.
2.
If the shell gets dirty, you can simply use pressurized water to clean the majority of the dirt.
In some cases you may need to use a mild soap and water solution. In this instance, you will
need to thoroughly rinse the spa. If not, you will have an issue with bubbles.
3.
Refill spa with fresh water to the recommended level. The water line should cover all the
upper jets in the spa. If you encounter an air lock, refer to the “Relieving Air Locks” section
above.
Troubleshooting
“LF” Error Code Fixes
1.
The most common reason for this error code is a lack of water in the hot tub. The water line
should be equal to the top of the highest jets (please refer to the “Filling Your Spa” section
above). If it is not, add water to the spa to reach this level, then reset spa power. This will
reset the memory and the error should be cleared.
2.
The 2
nd
most common reason for this error is an air lock during a fresh fill of water into the
spa. Air locks are common when filling up a spa for the first time. Please see “Relieving Air
Locks” section for tips on relieving air locks. If after the air lock is remedied you may still
have a “LF” error on the topside. To reset the memory, simply reset spa power. This should
clear the error code.
3.
The 3
rd
most common reason for this error code is a dirty filter or a clog in the line. Power
off the spa, remove the filter, and reset power. If the issue persists, please contact your dealer
for additional assistance.
Содержание Filbur FC-0125
Страница 1: ...OWNER S REFERENCE GUIDE NORTH AMERICA ...
