X
X
√
4
3
Installers must verify that the supporting surface will safely support the combined weight of
the equipment and all attached hardware and components.
WARNING
1b. For Solid Brick and Concrete Mounting
Drill pilot holes
1
2
Tighten both screws
leaving a 3mm space
from the wall.
WARNING
• Make sure that mounting screws are anchored into the center of the studs. The use of a stud
finder is highly recommended.
• Installers must verify that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
60mm
(
2.4"
)
60mm
(
2.4"
)
ø 10mm
(
ø 3/8"
)
Mark the
exact location of
mounting holes
1a. For Wood Stud Wall Mounting
2
1
Drill pilot holes
3
Tighten both screws
leaving a 3mm space
from the wall.
X
X
√
ø 4
.
5mm
(
ø 3/16"
)
55mm
(
2.2"
)
55mm
(
2.2"
)
Find and mark the
exact location of
mounting holes
W-A
W-B
3mm
3mm
W-A
X
A
With the arrows
pointing up
With the arrows
pointing up
