A
bout the Smith-Half Cage Series
Congratulations on your new purchase of the Smith-Half Cage
Series. This gym is capable of a variety of different exercises, as-
well-as, smooth and user-friendly adjustment features. In addition,
his gym has been designed to meet the needs and performance
requirements for a suitable home exercise machine. We hope you
are completely satisfi ed with this product and wish you many years
of enjoyment.
T
uff Stuff Equipment
This Tuffstuff product has been built to precise quality standards
and has been carefully packaged to ensure that damage will
not occur during shipment. The Home Lifetime Warranty and
signature indicating fi nal inspection has been conducted by our line
foreman, is an expression of our confi dence in the completeness,
he materials, and workmanship of this product.
W
arranty
SEE A COPY OF WARRANTY ON BACK PAGE.
R
egistration Card
To avoid unnecessary delays in warranty service and to insure that
a permanent record of your purchase is on fi le with our factory, be
sure to complete the warranty registration card and send it to Task
ndustries today.
P
rior to the Assembly of the Smith-Half Series
1. We advise you to consult your local Tuff Stuff retailer if you
should have a question or problem regarding the proper
assembly of this unit.
2. Consider the complete surface area of the Smith-Half Cage
Series. Use the overhead view located on the front page for
designing your layout before assembling. Once the Smith-Half
Cage Series has been fully assembled it will be heavy and
diffi cult to move, therefore you should assemble the unit in the
area where it is to be used upon completion.
3. It is recommended that another person assist you with the
assembly of this unit.
4. Neatly organize and identify all parts according to the Parts List
and the Exploded View Diagrams on pages 7 - 9.
T
ool Requirements
1. One 3/4” combination wrench
2. One 9/16” combination wrench
3. One ratchet
4. One 3/4” socket
5. One 9/16” socket
6. One rubber mallet
7. Windex or household glass cleaner
8. One can silicone spray/ tefl on spray lubricant
9. Measuring tape
10. Utility knife
A
bout the Icons
The icons displayed in this Assembly Instructions are used to
facilitate the correct assembly and safe use of this Product, as-
well-as to prevent injury to yourself or anyone else.
Note
provides information necessary to properly
complete a procedure or information which will
make the procedure easier to understand.
Caution
indicates a potentially hazardous
situation, which, if not avoided, may result in minor
or moderate injury. It may also be used to alert
against unsafe practices.
Loosely Fasten
provides a instruction to loosely
fasten (
ex: hand tighten
) a hardware assembly
only. This instruction is intended for the alignment
of hardware components during the assembly
process.
Fully Fasten
provides a instruction to fully fasten
(
ex: completely tighten
) a hardware assembly.
SCREWfiWIDTH
WASHERfi
DIAMETER
NUTfi
DIAMETER
SCREWfiLENGH
T
Hardware Measurement Diagram
A
ssembly Notes
1. Read and follow each step of this Assembly Instruction Manua
in sequence. Do not skip ahead, as it will result in an imprope
assembly or in having to disassemble parts later.
2. During the assembly of this unit you will be instructed to leave
some Hex Head Cap Screws loosely fastened. Naturally, they
will be fully fastened later in the assembly process. This is done
to prevent any diffi culty with alignment of some parts during this
assembly.
Note:
Due to continuing product improvements, specifi cations and designs are subject to change
without notice.
Smith-Half Cage Series
1
S
peci
fi
cations
TBU-335
THC-43C
TSM-45L
1. Maximum Wt. Capacity
N/A
400 Lbs.
300 Lbs.
2. Total Machine Weight
220 Lbs.
40 Lbs.
80 Lbs.
3. Footprint (LWH)
- See Front Cover
