Tuff stuff TBU-335 Smith-Half Cage Series, Инструкция по сборке

Страница: 6 / 12

FIG. 10
Next, affi x the two
Rear Side Supports (#5)
to the tw
Front Uprights (#4)
using four Hex Head Cap Screws 1/2-13 X 4 1/
(#78), four Flat Washers 1/2 X 1 3/4 (#68), four Flat Washers SAE 1/2
(#70), and four Nylon Insert Lock Nuts 1/2-13 (#101).
Smith-Half Cage Series 5
2
5
1
5
5
5
4
4
14
14
9
9
5
5
6
4
8
8
4
IG. 9
Affi x the two
Rear Side Supports (#5)
to the two
Bottom
rames (#1, #2)
using four Hex Head Cap Screws 1/2-13 X 3 1/2
#77), eight Flat Washers SAE 1/2” (#70), and four Nylon Insert Lock
Nuts 1/2-13 (#101).
Loosely Fasten: Do not completely fasten this hardware
assembly at this time, as it will be completely fastened later
in the assembly process.
FIG. 12
Attach the
Top Cross Brace (#6)
to the top of both
Fron
Uprights (#4)
using two
Reinforcement Plates 3 X 7 (#8)
, four He
Head Cap Screws 1/2-13 X 3 1/2 (#77), eight Flat Washers SAE 1/2
(#70), and four Nylon Insert Lock Nuts 1/2-13 (#101).
Fully Fasten : Proceed to align and fully fasten this hardwar
assembly and all of the previous assemblies that were le
loosely fastened.
IG. 11
Secure the two
Shaft Retainers (#14)
along with the two
onfi ned
Linear Shafts 1 X 70 (#9)
to the
Rear Side Frames (#5)
sing four Hex Head Cap Screws 3/8-16 X 3 (#85), eight Flat Washers
SAE 3/8” (#71), and four Nylon Insert Lock Nuts 3/8-16 (#99).
TBU-335 TBU-335
TSM-45L TBU-335