Tuff stuff Ranger Overland Rooftop Tent, Руководство пользователя

Страница: 10 / 13

4. After ensuring the tent is positioned correctly and centered and all eight bolts are tightened
securely, insert the rubber end caps into the ends of the mounting tracks.
Tent Set Up
1.
Release the straps over the travel cover. There will be two or four straps depending on model.
2.
Unzip the travel cover. Most people do not remove it they let it hang off the side of your vehicle or
roll up and tuck under the tent.
3.
Unbuckle the straps on the sides of the tent and across the ladder.
4.
Use the ladder as leverage to open the tent by pulling straight back until the ladder rests firmly on the
ground. Assure all the steps on the telescoping ladder are locked. The tent base should be level
and the ladder should form a 60° angle with the ground.
5.
To adjust the ladder height, pull on the locking pins in front of ladder and adjust to the desired
height. Make sure the pins lock at the desired height.
6.
Unfasten the grommets on the awning and rainfly. Locate the fabric slits in the tent skirt. Pre-drilled
holes are located underneath each slit. Insert the rainfly rod at a 45° angle into the hole and bend
slightly to hook the other end through the grommet. Repeat this process for both holes in the
awnings and both holes at either end of the rainfly.
Rain fly Rod Installation
Note: You can lightly tap them in with a rubber mallet.