BUILD INSTRUCTIONS
Tuff Birds
Super Tough Wings & Planes
TuffStar*
1500MM EPP 3 Channel Trainer Airplane
Test fit the main wing spar in the wing panels.
Insert the spar gently with a twisting motion so as
to not damage the wing. The spar is a tight fit in the
wing.
5. Test fit the spar in the main wing slot.
3
Ver 1.0 25 Dec 2017
Spar
With the Spar inserted into the wing, glue the
wooden Ribs to the both the wing root ends. Be
careful not to glue in the spars. The spar is inserted
in this step only for alignment of the spar hole.
6. Glue the wooden ribs to the wing root
The trailing edge of the wing root has to be cut of
to make the wing sit on the fuselage. The cut is
approximately 50MM wide ( fuselage width ) and
goes up to the wooden ribs glues earlier.
7. Cut the trailing edge of the wing root.
Congratulations.
The Wing is Completed !
