Learn more about Electric Football® and see our entire product line! Visit
www.TudorGames.com
ASSEMBLY INSTRUCTIONS: PART 2
7
INSTALLING SLIDING FRAME CLIPS, GOAL POSTS,
AND YARDSTICK MARKERS
1. Arrange the five (5) Sliding Frame Clips
around the playing field as shown to the right.
In the next step, you will install one Sliding
Frame Clip onto each Playing Field frame,
with an extra Sliding Frame Clip on one
sideline.
2. One by one, angle each Sliding Frame Clip as
shown to the right, placing the angled side
with holes onto the angled top of the Playing
Field frame. Then press gently downward
until the Sliding Frame Clip locks into place.
Repeat for the other four Sliding Frame Clips.
All Sliding Frame Clips should now slide along
the Playing Field frame. You can remove the
Sliding Frame Clips, if necessary, by reversing
the procedure.
3. With the Sliding Frame Clips in place as
shown to the right, insert the Goal Posts into
the center holes behind both end zones.
Center the Goal Post/Sliding Frame Clip
combination behind both end zones.
4. Insert one Yardstick Marker in the center hole
of the single Sliding Frame Clip on one
sideline.
5. Move the two Sliding Frame Clips together on
the other sideline and place two Yardstick
Markers in two holes so that they measure 10
yards on the field between them.
6. Your assembled Playing Field should look like
the drawing shown to the right.
As you play, slide the single Yardstick
Marker/Sliding Frame Clip combination on
one sideline back and forth to mark the line
of scrimmage. Slide both Yardstick markers
together on the other sideline to mark the
original line of scrimmage and first down.
CLICK!
